User-added image
Driver on

Belkin Knowledge Articles – Manually installing a wireless USB adapter


The Belkin wi-fi USB adapter provides wi-fi functionality to your wired pc to connect with a wi-fi community.  It additionally permits you to connect with any public wi-fi hotspot.  This text will information you on how one can manually set up your wi-fi USB adapter.

Earlier than you start:

  • Ensure you have downloaded the most recent driver for your machine.  For directions on how to do that, click on right here.
  • Obtain the drivers to the pc you’ll set up the wi-fi adapter on.  If that pc shouldn’t be capable of entry the Web wirelessly, you could hardwire it to your router utilizing an Ethernet cable.  It is strongly recommended to avoid wasting the downloaded drivers in a folder which you’ll simply discover.
Step 1:
Run the setup driver you’ve gotten downloaded.

NOTE:  On this article, the Belkin N450 DB/N600 DB Twin-Band Wi-Fi USB Adapter, F9L1101 v2 is getting used.

User-added image


Wait whereas the InstallShield Wizard prepares the setup.

User-added image

Step 2:
Choose the Browse… button if you wish to change the vacation spot folder location the place the setup will set up the information, then click on Subsequent >.


User-added image

The adapter is now configuring your new software program set up.

User-added image

Step 3: 
Plug in your USB Adapter to any out there USB port.

User-added image
Step 4:
When the set up is accomplished, the setup software program would require you to restart the pc.  Choose Sure, I wish to restart my pc now. to right away reboot the pc.  Click on End afterwards.

QUICK TIP:  You might also click on No, I’ll restart my pc later. for those who want to postpone the reboot.


User-added image

Leave a Reply

Your email address will not be published. Required fields are marked *