Download Arduino and install Arduino driver
Obtain the Arduino Setting
You possibly can direct obtain the newest model from this web page: http://arduino.cc/en/Major/Software program, When the obtain finishes, unzip the downloaded file. Make certain to protect the folder construction. Double-click the folder to open it. There needs to be just a few recordsdata and sub-folders inside.
Join Seeeduino to PC
Join the Seeeduino board to your laptop utilizing the USB cable. The inexperienced energy LED (labeled PWR) ought to go on.
Set up the motive force
Putting in drivers for the Seeeduino with window7
- Plug in your board and look forward to Home windows to start its driver set up course of. After just a few moments, the method will fail.
- Open the Gadget Supervisor by proper clicking “My laptop” and choosing management panel.
- Look underneath Ports (COM & LPT). It is best to see an open port named “USB Serial Port” Proper click on on the “USB Serial Port” and select the “Replace Driver Software program” possibility.
- Subsequent, select the “Browse my laptop for Driver software program” possibility.
- Lastly, choose the motive force file named “FTDI USB Drivers”, situated within the “Drivers” folder of the Arduino Software program obtain.
Be aware: the FTDI USB Drivers are from Arduino. However while you set up drivers for different Controllers, similar to Xadow Major Board, Seeeduino Clio, Seeeduino Lite,
you must obtain corresponding driver file and reserve it. And choose the motive force file you will have downloaded.
- The under dialog packing containers routinely seems if in case you have put in driver efficiently.
- You possibly can test that the drivers have been put in by opening the Home windows Gadget Supervisor. Search for a “USB Serial Port” within the Ports part.
- You can even see the serial port in Arduino surroundings.
Putting in drivers for the Seeeduino with window8
It is best to save these recordsdata which you’re enhancing earlier than putting in driver with window8，as a result of there’ll a number of energy off throughout working.
- Press “Home windows Key” +”R”
- Enter shutdown.exe /r /o /f /t 00
- Click on the “OK” button.
- System will restart to a “Select an possibility” display screen
- Choose “Troubleshoot” from “Select an possibility” display screen
- Choose “Superior choices” from “Troubleshoot” display screen
- Choose “Home windows Startup Settings” from “Superior choices” display screen
- Click on “Restart” button
- System will restart to “Superior Boot Choices” display screen
- Choose “Disable Driver Signature Enforcement”
- As soon as the system begins, you’ll be able to set up the Arduino drivers as identical as Home windows
Putting in drivers for the Seeeduino with Mac OS
- Obtain Driver for the Mac OS X model, named 2.2.18 (32bit)
- Open the motive force file which you simply obtain, and double click on FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg
- After double click on, you will note an installer window.
- You possibly can see the under dialog packing containers if in case you have put in driver efficiently.
Copyright (c) 2008-2016 Seeed Growth Restricted (www.seeedstudio.com / www.seeed.cc)