Scandisk Memory Card not recognised by Windows 10
Driver on

Driver_power_state_failure – Microsoft Community

Hello,

Verify with ASUStek Help, their on-line documentation and drivers, and ask of their
boards about any identified points. Replace the BIOS, low degree chipset, and
different main
on-board and separate machine drivers
(see driver replace strategies under).

The Bug_Check 9F CAUSE storport.sys which is a Home windows part which implies
one thing else drove it into Fault.

BugCheck 9F, {4, 12c, fffffa80039eeb00, fffff88002e1b810}

In all probability attributable to : storport.sys ( storport!RaSendIrpSynchronous+71 )

BiosVersion = UX32VD.211
BiosReleaseDate = 08/21/2012 <-- verify for updates to BIOS,
low degree chipset drivers
, and
the main on-board and separate machine drivers.
SystemManufacturer = ASUSTeK COMPUTER INC.
SystemProductName = UX32VD
SystemFamily = UX
SystemVersion = 1.0      
SystemSKU = ASUS-NotebookSKU
BaseBoardManufacturer = ASUSTeK COMPUTER INC.
BaseBoardProduct = UX32VD
BaseBoardVersion = 1.0  

ASUStek Help
http://help.asus.com/

ASUStek Boards
http://vip.asus.com/discussion board/default.aspx?SLanguage=en-us

ASUStek Drivers
http://help.asus.com/obtain/obtain.aspx?SLanguage=en-us

1. Use the strategies above :

———

2. Though there isn’t a clear indication TrendMicro OR DiskKeeper may very well be concerned
within the challenge.

———

3. FastStartup may very well be concerned : (strive disabling it)

How one can Flip “Quick Startup” On or Off for a Hybrid Boot in Home windows 8
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html

——–

4. Might be disk associated points so run CheckDisk :

Home windows 8 – Enhance efficiency by optimizing your onerous drive – see “To restore a drive:
http://home windows.microsoft.com/en-US/windows-8/improve-performance-optimizing-hard-drive

How one can Verify a Drive for Errors with “chkdsk” in Home windows 8
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-windows-8-a.html

Redesigning chkdsk and the brand new NTFS well being mannequin
http://blogs.msdn.com/b/b8/archive/2012/05/09/redesigning-chkdsk-and-the-new-ntfs-health-model.aspx

——–

5. If wanted run Driver Verifier to see if that signifies a CAUSE (see Driver Verifier strategies
under).

——-

6. Use all the opposite strategies within the troubleshooters under.

========================================================

Notice utilizing Win Key + X and Win Key + W (to get to Management Panel, Run, and Settings

as wanted). Win Key + D calls the desktop and the utilizing
Win Key
toggles Desktop
and Begin Display screen.

Translate the Home windows 7 strategies and use them on Home windows 8.

Resolving cease (blue display screen) errors in Home windows 7 – has a piece for in the event you can or cannot
begin Home windows (applies to Home windows 8).
http://home windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Home windows-7 

Verify this thread for data utilizing BlueScreenView, MyEventViewer and different strategies
to troubleshoot BlueScreens – prime Three replies (+1 different) (applies to Home windows 8).

http://solutions.microsoft.com/en-us/home windows/discussion board/windows_7-system/sometimes-i-get-a-blue-screen-when-using-ie-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990 

  ————————————————————————-

Additionally do that so you may see the doubtless bluescreens.

Home windows Vista robotically restarts in case your PC encounters an error that causes it to crash.
(additionally Home windows 7 and eight)
http://www.winvistatips.com/disable-automatic-restart-t84.html

==========================================================

This “might” be an influence provide drawback although it’s not the commonest trigger.

9f is doubtless a driver challenge. Antivirus/antispyware/safety applications can even trigger these points.
Have you ever added units recently or up to date drivers – you should definitely verify in Home windows Updates to
see if a driver was up to date previous to this occurring. This is also attributable to a free card

or cable and even a weak energy provide.

That error means a driver is just not dealing with the facility state correctly. Verify in Management Panel –

System Supervisor to make sure main drivers should not shut off throughout sleep – double click on Show

Adapter – NIC and WIFI – Sound and others – Energy Administration tab – uncheck Enable
pc to show off energy. Possibly just one has a difficulty.

(Use RUN as an alternative of Begin – Search as used on Vista or Home windows 7)

WINKEY + X – RUN – sort in MSCONFIG.exe

Normal Tab – verify Diagnostic Begin  – APPLY / OK  –  REBOOT

Strive it now. If it nonetheless blue screens assume Video Driver. If not assume NIC, Wifi, Sound, or……
(and it nonetheless may very well be video interacting with one thing else). See troubleshooter hyperlink
above for my generic driver replace strategies.

Bug Verify 0x9F: DRIVER_POWER_STATE_FAILURE <-- learn this hyperlink
http://msdn.microsoft.com/en-us/library/ff559329(v=vs.85).aspx

BCCode: 9F  0x0000009F  <-- learn this hyperlink
http://www.faultwire.com/solutions-fatal_error/DRIVER-POWER-STATE-FAILURE-0x0000009F-*1167.html?order=date

————————————————————

Driver Verifier can assist discover some BSOD points :

Utilizing Driver Verifier to establish points with Home windows drivers for superior customers
http://help.microsoft.com/kb/244617 

How To Troubleshoot Driver Issues in Home windows Vista or 7 (and Home windows 8).
http://www.winvistaclub.com/t79.html 

Utilizing Driver Verifier
http://msdn.microsoft.com/en-us/library/ff554113(v=VS.85).aspx 

How one can use Home windows Driver Verifier Supervisor to Troubleshoot & Establish Driver Pointshttp://www.youtube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-post3.html

Utilizing Driver Verifier
http://www.faultwire.com/options/using_driver_verifier.php 

How one can use Home windows Driver Verifier Supervisor to Troubleshoot & Establish Driver Points
http://www.youtube.com/watch?v=_VwIDD9xngM

 

You may disable Driver Verifier
http://help.microsoft.com/kb/244617 

WINKEY + X – RUN – sort in -> verifier /reset      hit enter to disable

Use BlueScreenView to see if there’s a driver specified within the error message. Additionally verify with
MyEventViewer on the time of the BlueScreen.

If DriverVerifier creates a minidump add it and publish the hyperlink right here so we are able to analyze it.

——————————————————————————————————————–

That is my generic how you can for correct driver updates : (replace your main drivers and BIOS)

This utility makes it straightforward to see which variations are loaded : (Set VIEW to Conceal Microsoft drivers
– replace these with out Dump of their names.)

DriverView – Free – utility shows the checklist of all machine drivers at the moment loaded in your system.
For every driver within the checklist, extra helpful data is displayed: load deal with of the motive force,
description, model, product identify, firm that created the motive force, and extra.
http://www.nirsoft.web/utils/driverview.html

For Drivers verify System Maker as fallbacks and System Maker’s that are probably the most present.
Management Panel – System Supervisor – Show Adapter – write down the make and full mannequin
of your video adapter – double click on – Driver’s tab – write down the model information. Now click on

UPdate Driver (this may increasingly not do something as MS is way behind certifying drivers) – then Proper

Click on – Uninstall – REBOOT this may refresh the motive force stack.

Repeat that for Community – Community Card (NIC), Wifi, Sound, Mouse and Keyboard if third get together
with their very own software program and drivers and some other main machine drivers you’ve got.

Now go to System Maker’s website (Dell, HP, Toshiba as examples) (as rollback) after which System
Maker’s website (Realtek, Intel, Nvidia, ATI as examples) and get their newest variations. (Search for
BIOS, Chipset and software program updates at System Maker’s website whereas there.)

Obtain – SAVE – go to the place you place them – Proper Click on – RUN AD ADMIN – REBOOT after
every set up.

At all times verify in System Supervisor – Drivers tab to make sure the model you’re putting in truly
exhibits up. It’s because some drivers rollback earlier than the newest is put in (sound drivers
notably do that) so set up a driver – reboot – verify to make sure it’s put in and repeat as
wanted.

Repeat at System Makers – BTW at System Makers DO NOT RUN THEIR SCANNER – verify
manually by mannequin.

Manually have a look at producer’s websites for drivers – and System Maker’s websites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Microsoft – {Hardware} and Drivers
http://home windows.microsoft.com/en-US/home windows/hardware-drivers-help#hardware-drivers-help=windows-8

Why is not Home windows discovering my machine?
http://home windows.microsoft.com/en-US/windows-8/why-isnt-windows-finding-device

What if a tool is not put in correctly
http://home windows.microsoft.com/en-US/windows-8/what-device-isnt-installed-properly

Hope this helps.


Rob Brown – Microsoft MVP <- profile - Home windows Professional - Client : Bicycle <- Mark Twain stated it proper!

Leave a Reply

Your email address will not be published. Required fields are marked *