wireless networking - how to access wifi adapter from wsl 2 and use aircrack
Driver on

drivers – How to use USB flash drives with Windows 98?

I’ve a Compaq desktop laptop operating Home windows 98 SE. It has been handed down a couple of instances, and I do not recall it ever being on-line but it surely does have a model of Firefox from 2007 so I may very well be unsuitable about that.

I not too long ago tried utilizing the interior modem on the pc – a 56okay Compaq modem – for the primary time. The modem reveals up in sure system dialogs however not one of the dialers – HyperTerminal, Telephone Dialer, and so forth. would efficiently join.

I believed maybe the modem was damaged. I had a Dell Dimension 8200 laying round that had Home windows XP, so I opened it up and took out its inner modem, and the NIC, for good measure. I put in each within the Compaq laptop. It did not boot the primary time however I cycled the facility and it booted up high quality, roughly.

The “Add New {Hardware}” wizard didn’t open by default. I ran the wizard but it surely did not detect any new {hardware}. Nowhere within the system was both the NIC or the second modem acknowledged.

I believed maybe perhaps I did not have the fitting drivers, so I made a decision to load some on. The issue is, since this laptop is 20+ years previous, it solely works with USB 1.0. My analysis reveals that there are third-party drivers obtainable that permit Home windows 98 SE to work with USB 2.Zero gadgets together with flash drives. I’ve a PS/2 keyboard and mouse so flash drives listed below are my important concern.

I loaded the next drivers onto a floppy disk, and introduced it dwelling:

To check it out, I plugged a flash drive into the pc and the Add New {Hardware} Wizard opened and prompted for drivers. I then loaded the floppy disk and manually ran the .exe file for the primary driver. It put in and rebooted. However once I plugged a flash drive in once more, the Add New {Hardware} Wizard now not opened robotically, and the flash drive was nonetheless not acknowledged in my laptop.

I’ve nothing in opposition to floppy disks, actually, however having the ability to use USB flash drives could be way more sensible. This would not be as vital if I might get one of many modems to work, however proper now neither is working. I imagine somebody is getting an exterior US Robotics 56okay modem for me on eBay in the meanwhile, and my hunch is exterior modems are extra dependable than inner modems in order that one may fit extra seamlessly. I am not so certain although, given my issues up to now.

I extracted the information for the second driver however I discovered only a bunch of “.sys” information. I did not do something after that.

I’m following the procedures obtainable on-line for getting Home windows 98 to work with USB 2.0. What else might I do to get my Home windows 98 SE PC to work with USB flash drives? Do I simply want drivers, or is another change required?

My important cause for needing USB 2.Zero assist is so I can load drivers onto a flash drive and switch them to the Home windows 98 laptop to load drivers for the modem. I’ve a sense I could must do trial and error to get the fitting drivers, and given the capability of a floppy disk that route would probably not be sensible. For the time being, nevertheless, floppy disks are the one factor working completely for me.

Leave a Reply

Your email address will not be published. Required fields are marked *