Fix Broken Wan miniports - Networking
Driver on

Fix Broken Wan miniports – Networking

Now the onerous half. The miniports cannot be put in like regular units and are blocked by default. There are a few instructed strategies of reinstalling them by commenting out the ExcludeFromSelect part in netrasa.inf. Nonetheless, in my makes an attempt this file is locked down by the system and there is not a simple option to make them editable.

1) Obtain a present model of devcon.exe. Take into accout the 32-bit model gained’t work on 64-bit programs. Observe the steps outlined in “How one can Acquire the Present Model of Machine Console Utility (DevCon.exe)” http://social.technet.microsoft.com/wiki/contents/articles/182.aspx on Microsoft’s TechNet wiki to acquire the ISO. From there I used 7-zip to open the ISO. Go into the WDK folder and search for setuptools_fre_cab001.cab. Once more drilling into the cab utilizing 7-zip you will discover a file referred to as _devcon.exe_00000. Extract this file and rename it to devcon.exe.

2) Open a Command Immediate and cd to the listing the place you extracted devcon.exe

3) For every miniport that you’ve got beforehand uninstalled, execute the command outlined beneath. DO NOT run all of them or run the command twice, as that may create second model of the prevailing miniport, which may trigger issues once more. If you’re inquisitive about the place the {Hardware} ID and inf title comes from, in machine supervisor on a working system, proper click on the miniport -> Properties -> Particulars Tab -> within the Property drop down choose {Hardware} Ids or Inf title to see.

If working the command experiences “driver set up” failure, don’t fear, it normally does. The one drawback is when it complains in regards to the inf file lacking, or a lacking class (by which case you probably made a typo within the final a part of the command).

◦IKEv2:

devcon.exe set up c:Windowsinfnetavpna.inf MS_AgileVpnMiniport

◦IP:

devcon.exe set up c:Windowsinfnetrasa.inf MS_NdisWanIp

◦IPv6:

devcon.exe set up c:Windowsinfnetrasa.inf MS_NdisWanIpv6

◦Community Monitor:

devcon.exe set up c:Windowsinfnetrasa.inf MS_NdisWanBh

◦L2TP:

devcon.exe set up c:Windowsinfnetrasa.inf MS_L2tpMiniport

◦PPPoE:

devcon.exe set up c:Windowsinfnetrasa.inf MS_PppoeMiniport

◦PPTP:

devcon.exe set up c:Windowsinfnetrasa.inf MS_PptpMiniport

◦SSTP:

devcon.exe set up c:Windowsinfnetsstpa.inf MS_SstpMiniport

As soon as finished REBOOT. For me the IKEv2 machine nonetheless had a exclamation mark after reboot. For this run “sc config RasAgileVpn begin= demand” from a Command Immediate.

Leave a Reply

Your email address will not be published. Required fields are marked *