Installing USB driver on Windows

Most Bitcraze merchandise utilizing USB communication makes use of the libusb driver
for Home windows. This driver permits to speak with USB units with out
having to develop customized drivers. This web page explains the right way to set up the
libusb driver utilizing the Zadig software.

Set up the motive force

To start with obtain Zadig from its web site: http://zadig.akeo.ie/.

Plug the Bitcraze gadget within the PC. Home windows ought to show some
set up window. On home windows eight and 10 it does nothing and closes
itself. On home windows 7 it’s a must to shut the set up failed window.

As soon as home windows is out of the best way, launch Zadig, it’s best to see your gadget
within the checklist. Choose the gadget, choose libusb and click on set up:

The set up course of ought to run and succed. Set up is normally fast
but it surely might additionally take a while:

Et voilà! The motive force is now put in and you should use your USB Bitcraze
gadget.

Reinstall driver

If the motive force is wrongly put in and must be reinstalled or if
Home windows have already got one other driver put in for this gadget, plug the
gadget, launch Zadig and click on “Possibility/present all units”. You must
be capable of select the gadget within the checklist and reinstall the libusb
driver. For instance with the Crazyradio.

Troubleshooting

If issues doesn’t work verify that the gadget seems as a libusb gadget
within the Home windows gadget supervisor. If it’s not the case attempt to reinstall
the motive force as described above.

If you’re having issues with the gadget not working on a regular basis you
can attempt to set up the libUSBK driver, it have been behaving a bit
higher to some model of the Bitcraze softwares: