Internal Drives shown as external (OpenCore, AMD, Catalina 10.15.3) : hackintosh
Driver on

Internal Drives shown as external (OpenCore, AMD, Catalina 10.15.3) : hackintosh

SOLVED:

— That is for OpenCore 0.5.5 and would possibly nonetheless work. Take into accout, although, that sure quirks are eliminated, renamed or mixed into new ones. The described approach would possibly subsequently not work eternally and even confuse you as the required quirk could be gone… —

Authentic Drawback (see under!): All inner drives (2TB SSD partitions) are proven as yellow exterior drives though Kernel/Quirks/“ExternalDiskIcons” being set to True in config.plist…?!

r/hackintosh - Internal Drives shown as external (OpenCore, AMD, Catalina 10.15.3)

Higher three are inner partitions (DualBoot), Decrease three are exterior partitions.

Answer (because of u/LGA1366 and u/mast04 in feedback under):

  • Obtain Hackintool, if you do not have it but.

  • Open it and go to PCI tab, seek for your mass storage within the class System Identify and Class

  • Perhaps make that window wider to see the system path. Proper click on the entry and “Copy System Path”. It is in all probability one thing like “PciRoot(0x0)/Pci(0x1,0x1)/Pci(0x0,0x0)”. (You too can “Copy IOReg Path” and have a look at your Drive in IORegistryExplorer for enjoyable.)

r/hackintosh - Internal Drives shown as external (OpenCore, AMD, Catalina 10.15.3)

Hackintool

  1. Mount your EFI partition in Hackintool or in Terminal with “sudo mkdir /Volumes/efi” and “sudo mount -t msdos /dev/disk0s1 /Volumes/efi”

  2. Begin ProperTree.

  3. Open your EFI Partition and navigate to your config.plist.

  4. Drag your config.plist onto the ProperTree Brand (Rocket) in your Dock,

  5. config.plist is opened in ProperTree. Navigate to DeviceProperties/Add.

  • Proper-click it “Add” so as to add a baby key beneath “Add”.

  • Identify it with the above copied system path.

  • Change this entry’s Kind to “Dictionary”.

  • Proper-click so as to add a baby key beneath that key.

  • Identify it “built-in”, change the kind to “Knowledge”, and set the worth to “01000000”.

  • 6. Perhaps set “ExternalDiskIcons” to True in Kernel/Quirks, if not set but. In all probability essential, however undecided. Does not damage to to so.

r/hackintosh - Internal Drives shown as external (OpenCore, AMD, Catalina 10.15.3)

u/LGA1366: “Use DeviceProperties so as to add a built-in property to your SSD controller” to your config.plist

r/hackintosh - Internal Drives shown as external (OpenCore, AMD, Catalina 10.15.3)

ORIGINAL “Assist” POST

TL; DR: Learn daring elements solely. Config and Questions are on the finish! Many thanks.

I simply efficiently completed constructing and organising my first PC and AMD dual-boot (macOS 10.15.Three and Win10) OpenCore (0.5.5) Hackintosh with was truly fairly straightforward because of the the nice Hackintosh Neighborhood!

(I simply {followed} the OpenCore Vanilla Information from khronokernel [Thank you so much!!]. That’s EXACTLY and ONLY that – I mix-followed a pair guides at first, however failed… I counsel watching Snazzy Labs Opencore Information, however solely to grasp the method. The OpenCore Information is extra detailed… Additionally: The twin-boot half was quiet a ache; I’ll clarify my course of in my success publish.)

Earlier than I publish my success, I want to repair a pair issues I got here throughout, one after the other. My methods elements and configuration may be discovered on the finish.

Drawback: Inner Drives proven as exterior (yellow)

All inner drives are proven as yellow exterior drives though Kernel/Quirks/“ExternalDiskIcons” being set to True in config.plist…?! This can be a DualBoot system by way of NVMe M.2 2TB SSD.

What I’ve tried: Nothing. Do not know the place to start out…

Questions

  1. Is that this linked to Kernel/Quirks/“ExternalDiskIcons” being set to True in my config.plist? In accordance with Khronokernel’s OpenCore Information this ought to be set to True (that is why I set it to True): “Exterior Icons Patch, for when inner drives are handled as exterior drives however may make USB drives inner. For NVMe on Z87 and under you simply add built-in property by way of DeviceProperties.”

  2. Is NVMeFix.kext essential for me? EDIT: NO.

  3. Any solutions a lot appreciated!

My Hackintosh’s configuration

These are solely the elements of my configuration that I take into account related for my query. The complete config and all elements may be discovered right here: https://www.reddit.com/r/hackintosh/feedback/f06gsb/success_to_be_oc_m2_dualboot_amd_r5_rx_5700_xt/

  • OpenCore 0.5.5

  • macOS Catalina 10.15.3

  • OpenCore EFI recordsdata:

    • Lively ACPI:

    • Lively Drivers:

    • Lively KEXTS:

  • Config.plist: http://www.filedropper.com/configreddit (stand up thus far one above. Solely use if precisely identical elements as me; see under. Change in keeping with OpenCore Information!! [PlatformInfo removed; Populate this yourself!] This file would possibly change on my journey.) Modified with ProperTree strictly in keeping with the OpenCore Information. Modifications related concerning this query:

Leave a Reply

Your email address will not be published. Required fields are marked *